PLATFORM

Standard system colours: Matte black, Matte sand, Matte olive green or Rescue red
Dimensions Storage (LxWxH): 4.5m x 1.6m x 2.0-2.5m
Weight of basic system: 5,500 kg (excluding tools, etc.)
Load from tracks: approx. TBD kg/cm2
Manipulator: 4 joint, 3 arm system for maximum reach

(5 to 8 DOF-Degree Of Freedom*)

Vertical reach: Approximately 5.5m *
Horizontal reach: Approximately 5.0m *
Lifting Capacity @ front Approximately 4,000 kg*
Lifting Capacity @ 5.0m Approximately 1,000 kg*
Slewing Speed: <16 sec 360 degrees
Speed: Approximately 3.4 km/h
Incline angle: 30 degrees
Power pack: Kohler or Kubota three-cylinder, water cooled, 4-stroke, 55kW diesel engine  Kohler: Tier 4, EU Stage IV ; Kubota: Tier 3, EU Stage IIIA
Mission Time: Full tank, minimum 8 hours
   
Towing eyelets front and rear: For towing in both directions and strap down
Lifting:  Single sling lifting
Extra hydraulic function: Request for Technical Information
Load Holding valves: Request for Technical Information
Turret break: Request for Technical Information
Heat and impact protection C2/C3: Request for Technical Information

Standard Sensors:

Turret rear left: Request for Technical Information
Turret front right: Request for Technical Information
Tool sensor: Request for Technical Information
Front/Rear sensor: Request for Technical Information
LED light and control: Request for Technical Information
Sensor coding: Request for Technical Information
Sensor night-mode: Request for Technical Information
Can-Cable: Request for Technical Information
Two way audio: Request for Technical Information

PCM – Platform Communication Module

Integrated with the platform and housing the Radio Module as well as the CBB – Communication Breakout Box which serves as the hub for sensors and tools used on the Platform. The PCM is communicating wireless (>1.000m) with the TRM.

System Communication:   High capacity Wireless over one DIGITAL military graded radio
“2.3 Mbps, specially designed for NLOS (Non Line Of Sight) Voice/Video/Data in multipath rich environments.”
Distance: Request for Technical Information
Max data rate: Request for Technical Information
Modulation: Request for Technical Information
Protocol: Request for Technical Information
Network: Request for Technical Information
Encryption: Request for Technical Information
Encryption: Request for Technical Information
Frequencies: Request for Technical Information
Power Output: Request for Technical Information
Antenna Gain: Request for Technical Information
Transmitting Power: Request for Technical Information
Optional Communication:  Optical fibre cable, maximum – Request for Technical Information

System OPERATOR Modules:

TRM – Transmitting Receiving Module

Is communicating wireless (>1.000m) with the PCM onboard the platform. The TRM is located on the operators side, connected to the OCM with 10m cable to be able to position in the open for best transmitting still keeping the operator protected. The basic TRM is supplied with a tripod adjustable to max 3m height. Optional 5m antenna system can be ordered for improved reach and with the integrated pan/tilt camera with zoom function, giving the operator an overview of the robot and surroundings.

OCM – Operators Control Module

The OCM displays and controls the sensors onboard the platform, such as cameras. The military graded headphones, noise cancellation/sound enhancement, feeds audio information from the platform and allows for the operator to communicate with persons around the robot. The OCM is a rugged laptop fitted in a Peli type of case, also housing power pack for TRM and RCM. The laptop can be programmed for additional sensors and display of information, depending on today and future needs. To further support operation with two operators, an optional  military graded PC-tablet on separate tripod and additional headphones also providing intercom, can be ordered.

RCM – Remote Control Module

The RCM is the ergonomic hand-control, manoeuvring functions and tools of  the Platform.  The RCM also includes an LCD screen displaying advanced functions that can also be manoeuvred from the RCM or a similar display on the OCM. The RCM is connected with 10m cable to the OCM, but can  also  be connected directly to the platform for off/on-loading or other safe operations.